Free Delivery on orders over $200. Don’t miss discount.
-19%

DC/DC Converter Buck 24V to 12V 40A 480W MAX

$28.99
0 sold
  1. 12V DC Voltage Transformer:Input range:20V to 40V; output voltage : 12V(fixed output) output current : 40A output power : 480W (MAX). Be sure to insulate the wire 0.4 inches (10 mm or so) and insert it into the plug when installing.
  2. Heat Dissipation Performance:The 12V voltage regulator has IP67 waterproof classification, compact aluminum housing, epoxy resin potting, 100% waterproof, dustproof, shockproof, better heat dissipation performance.
  3. Intelligent Protection:Assembled with smart chip, equipped with intelligent overcurrent/overload/low load/short circuit/overheat protection by using the 12 V power transfomer voltage.
  4. Widely Application:The 12 V DC voltage converter is widely used in the fields of automotive, photovoltaics, industrial plants, motor vehicles, boats, agricultural machinery, camping, mobile structures, hobby and DIY etc.
  5. Please Note:The load connected to the transformer converter output should not exceed the specified maximum load. (Any greater load will damage the buck converter).The 12 V DC power converter adapter does NOT have input reverse protection, pay attention to the input correct, negative reverse, will lead to permanent damage to the product.
605 people are viewing this right now
100 in stock
Trust Badge
Guaranteed safe & secure checkout

Description

  • A. Test the environmental conditions
  • B. Unless otherwise specified, the tests in this specification shall be conducted
    under the standard atmospheric conditions tested
  • C. temperature:15℃~35℃.
  • D. Relative humidity: 45%~75%
  • E. The instrument accuracy of the measured voltage shall not be less than 0.5 level, and the internal resistance shall not be less than 10 KΩ / V.
  • F. The instrument accuracy of measuring current shall not be less than the 0.5 level
  • G. The accuracy of the instrument used for measuring the temperature shall not be less than ± 1℃

 

  • Input range:20-35V
  • Rated input voltage:24V
  • transfer efficiency:95%
  • incoming line:15-16CM(R+ B-)
  • output voltage:12V
  • output:40A MAX
  • maximumoutput:480W MAX
  • No-load adjustment rate:2%
  • load regulation:3%
  • quiescent dissipation:≤65MA
Do not use it near a heat source (such as a fire or a heater)
Do not connect the input line to 220V electricity
Do not put the product into the fire or heat it
Do not short-circuit the positive or negative poles of the product with wires or other metal objects
Non-professional personnel are prohibited to disassemble and repair by themselves
Select your currency
0