DC DC Buck 15-35V to 12V Voltage Converter 12V/24 to 3A 36W MAX Step Down Transformer
12V DC Voltage Transformer: Input range:15V to 35V; output voltage: 12V fixed output; output current: 3A; output power: 36W MAX; Be sure to insulate the wire 0.4 inches 10 mm or so and insert it into the plug when installing
Heat Dissipation Performance: The 12V voltage regulator has IP67 waterproof classification; compact aluminum housing,mepoxy resin potting; 100% waterproof, dustproof, shockproof, better heat dissipation performance
Intelligent Protection: Assembled with smart chip, equipped with intelligent overcurrent overload low load short circuit overheat protection by using the 12 V power transfomer voltage
Widely Application: The 12V DC voltage converter is widely used in the fields of automotive photovoltaic industrial plants motor vehicles boats agricultural machinery camping mobile structures hobby and DIY etc
Please Note: The load connected to the transformer converter output should not exceed the specified maximum load, Any greater load will damage the buck converter, The 12 V DC power converter adapter does NOT have input reverse protection, pay attention to the input correct, negative reverse, will lead to permanent damage to the product
Description
Verification of environmental conditions
Unless otherwise specified, the tests in this specification shall be conducted under the standard atmospheric conditions tested
temperature: 15℃-35℃
Relative humidity: 45%~75%
The instrument accuracy of the measured voltage shall not be less than 0.5 levels and the internal resistance shall not be less than 10 KΩ/V
The instrument accuracy of measured current shall not be less than 0.5 level
The accuracy of the instrument used for temperature measurement shall not be less than ± 1℃
Product parameters
Input range: 15-35V
Rated input voltage: 15V/24V/35V
transfer efficiency: 95%
input line: 15-16CM R+ B-
output voltage: 12V
Output: 3A MAX
Maximum output: 36W MAX
No load adjustment rate: 2%
load regulation: 3%
idle dissipation: ≤15MA
ripple wave: 200mVP-P
SAFETY TESTING
Do not use the device near a heat source such as a fire or heater
Do not connect the input line to 220V electricity
Do not put the product in fire or heat it
Do not short the positive and negative poles of the product with wires or other metal objects
It is forbidden for non professional personnel to disassemble and repair the product by themselves
Additional information
| Weight | 0.1 kg |
|---|---|
| Dimensions | 3.8 × 2 × 1.5 cm |
Related products
Rating & Review
There are no reviews yet.