DC/DC 24V Step-Down to 12V 20A 240W MAX Converter, DC 24V to 12V Converter, Power Buck Regulator, Step-Down Transformer with Waterproof Fuse and Terminal Block for Cars, Trucks ect
24V Step-Down to 12V：DC/DC converter regulator can step down 24V to 12V and 20A current to meet your actual current requirement. Input range: 20V-36V, output voltage: 12V, output current: 20A. Note: 1.Please check if the input voltage is correct before use.2.Please check the positive and negative polarity of the power supply before wiring.
High Conversion Efficiency：Multiple intelligent protection functions, high and stable conversion efficiency. Conversion efficiency can reach more than 90%.If the voltage is too high, the circuit is faulty or abnormal, the fuse will blow and the transformer will stop working, thus protecting the appliance.
Multiple protection：This voltage regulator has output over-current protection, output short circuit protection, input under-voltage protection, chip high temperature protection; with potting technology, it is waterproof, dustproof, moisture-proof, shock-proof and so on, and it can be used in a variety of occasions such as in-vehicle, outdoor, underground and so on.
Wide application：Our 24V step-down converter module can be used for integrated wiring, fire alarm system monitoring. Car radio, audio, bus, minibus, truck screen, cab advertising screen; LCD TV, LED, solar power system; intercom and so on.
IPX-7 Waterproof：This DC step-down converter is filled and sealed with thermally conductive organic silicone, making it dustproof, waterproof and vibration-proof. So it can withstand heavy rain or bad weather outdoors.
Description
DC/DC 24V to 12V/20A MAX Voltage Converter
Parameters
Name：Voltage Reduction Converter
Brand:Yaboang
Function：Voltage Reduce
Typical Input Voltage: 24V
Efficiency: Over 90%（When 24V input）
Output voltage: 12V DC
Line output current: 20A
Output power:240W
Waterproof rating: IPX-7
Working temperature: -40℃ ～ +85℃
Working Humidity: 0～95%RH
Storage temperature：-40℃ ～ +100℃
Storage Humidity: 0～95%RH
L*W*H: 74*74*32MM
Weight: about 250-260G
Instructions for connecting the product terminals:
Step 1: Remove approx. 10 mm of the cable’s insulation.
Step 2: Remove the booster key and insert the cable.
Step 3: After inserting the cable, press the boost button firmly.
DC-Buck Converter Safety Manual
1. the load connected to the output of the power controller should not be higher than the maximum load power; any higher load will damage the power controller.
2. if the ambient temperature is too high, the power should be reduced accordingly. Operation at low temperatures is a guarantee of long-term reliable operation of the power supply unit.
3. Do not use the device near heat sources such as fire or heaters.
4. Do not connect the input cable to the 220 V household power supply.
5. do not place the appliance near sources of ignition or heaters. 6.
6. the appliance must not be dismantled or repaired by non-professionals.
7.The input voltage must not exceed the fluctuation range of the converter.
8.The output power of the converter must be greater than the power required by the connected devices.
9.The positive and negative leads must not be reversed.
Package Includes
1x DC to DC Voltage Down Transformer
Additional information
| Weight | 0.3 kg |
|---|---|
| Dimensions | 17.7 × 14.5 × 4 cm |
Rating & Review
There are no reviews yet.