DC/DC Buck 30-90V to 24V Voltage Converter 36V 48V 60V 72V 84V to 24V20A 480W MAX Step Down Power Transformer
- 30-90V to 24V DC Voltage Transformer：Input range:30V to 90V; output voltage : 24V(fixed output) output current : 20A output power : 480W (MAX). Be sure to insulate the wire 0.4 inches (10 mm or so) and insert it into the plug when installing.
- Heat Dissipation Performance：The 30-90V to 24V voltage regulator has IP67 waterproof classification, compact aluminum housing, epoxy resin potting, 100% waterproof, dustproof, shockproof, better heat dissipation performance.
- Intelligent Protection：Assembled with smart chip, equipped with intelligent overcurrent/overload/low load/short circuit/overheat protection by using the 30-90V to 24V power transfomer voltage.
- Widely Application：The 30-90V to 24V DC voltage converter is widely used in the fields of automotive, photovoltaics, industrial plants, motor vehicles, boats, agricultural machinery, camping, mobile structures, hobby and DIY etc.
- Please Note：The load connected to the transformer converter output should not exceed the specified maximum load. (Any greater load will damage the buck converter).The 30-90V to 24V DC power converter adapter does NOT have input reverse protection, pay attention to the input correct, negative reverse, will lead to permanent damage to the product.
Description
Verification of environmental conditions.
A. Unless otherwise specified, the tests in this specification shall be conducted under the standard atmospheric conditions tested
B. temperature: 15℃~35℃.
C. Relative humidity: 45%~75%.
D. The instrument accuracy of the measured voltage shall not be less than 0.5 levels and the internal resistance shall not be less than 10 KΩ/V.
E. The instrument accuracy of measured current shall not be less than 0.5 level.
F. The accuracy of the instrument used for temperature measurement shall not be less than ± 1℃.
Product parameters
Input range: 30-90V
Rated input voltage: 36V/48V/60V/72V/84V
transfer efficiency: 95%
input line: 15-16CM (R+ B-)
output voltage: 24V
Output: 20A MAX
Maximum output: 480W MAX
No-load adjustment rate: 2%
load regulation: 3%
idle dissipation: ≤15MA
ripple wave: 200mVP-P
SAFETY TESTING
Do not use the device near a heat source (such as a fire or heater).
Do not connect the input line to 220V electricity.
Do not put the product in fire or heat it.
Do not short the positive and negative poles of the product with wires or other metal objects.
It is forbidden for non-professional personnel to disassemble and repair the product by themselves.
Additional information
| Weight | 0.3 kg |
|---|---|
| Dimensions | 7.4 × 7.4 × 3.2 cm |
Related products
Rating & Review
There are no reviews yet.